Different Types of Home Foundation

Building a home from the ground up is definitely an exciting task to make. However, it is also one of those tasks that need research and time to make sure that everything will go smoothly. The first decision you might be facing is to determine what type of foundation you want to use beneath your house. Before you make a decision, it is your job to do some research and be aware of the various types of foundations to know what would be suitable for the home design that you have been planning for. Here are the following types of home foundations that you could consider: 

Basement 

Houses with basements start with a hole nearly 8 feet deep that ends with a concrete slab. Commonly, the basement’s walls are molded by cinder blocks. The whole process is done in 3 parts: the beams are poured first, followed by the walls, and lastly the slab inside the walls. 

This process enables that basement foundation to be waterproof. Homes that have basements could add additional income as well since it adds square footage to the home, which gives additional space for storage if needed. Another reason why basement foundations are recommended is that they are highly resistant to extreme weather condition and fire and they are very durable.  

 

Crawlspace 

Houses having crawlspace foundations are raised off the floor by about 2 ft. This foundation is usually formed with a brick facing and cinder block. This kind of foundation is recommended in places with moist climates where water tends to accumulate. Since the house is elevated off the ground, there’s a minimal chance for it to be damaged by the piled up water. Moreover, the crawlspace foundation is less likely to be infested by termites. But, they are susceptible to fungi and mold buildup due to the environment made by the empty space.  

 

Beam and Pier 

This foundation comprises concrete piers or wood posts set deep into the ground, bearing the building’s weight. This foundation doesn’t directly rest on the ground. Rather, it’s elevated about 18 degrees more, with utility units for electricity and plumbing installed in this crawlspace. A lot of home builders select this foundation type since it can be built easily and it is less expensive compared to other choices. Although this type of foundation can be best used in smaller buildings.  

 

Slab 

Basically, a slab foundation is a concrete and flat pad that’s poured onto the ground at a home site. Homebuilders vouch for utilizing slab foundations, especially in warmer places because freezing temperatures could cause the slab to change during cold seasons. As you build your home, keep in mind that the sewer pipe is usually put in place before the concrete is poured.  

 

As you choose a foundation for a house, you need to reach out to a qualified professional from Concrete Boise. You can talk about what you want and they will let you know which among the types of foundation will suit the home style that you want to achieve and the climate. Contact them now! 

 

Concrete vs. Steel: Which is better?

Before the use of concrete or steel, building homes and structure are mostly done with the use of wood, thatch, and adobe. Now is a modern construction industry, indeed. The generations before our forefathers might not have visualized today’s cities with massive skyscrapers piercing overhead. 

The question now is which construction material is responsible for all these? Is concrete more superior than steel or vice versa? It’s necessary to look into concrete and steel individually in order to answer that question.  

The Benefits of Concrete and Steel  

There’s no doubt that concrete and steel offer a lot of benefits to humankindWhile it may not be necessary to compare one to the other because they have different qualities, it may be interesting to note how each contributes to the following factors:   

  1. Safety

Between steel and concrete, studies show that concrete is much safer. The cast that concrete forms make a building resistant to impact and explosions. Concrete can also endure a very high temperature for quite some time without losing its structural integrity. It can also resist wind quite effortlessly.  

Steel, on the other hand, can’t do most of what concrete can do in the list above. Steen can melt and soften away when subjected to a very high temperature. Even so, there are additives to steel that can make it work better in terms of fire and heat. 

  1. Cost

Construction materials are getting more expensive by the minute. However, concrete prices seem quite stable, which is good news. Concrete prices rarely fluctuate even if the prices of other commodities have risen so high.  

Unfortunately, we can’t say the same for steel. The prices of steel sways strongly it is almost impossible to predict how it will behave in the next couple of years. The increase in the price of steel can go from 20% to 50% over a specific period of time.  

  1. Availability

Steel and cement are manufactured using natural resources so it’s quite understandable that there will be reports of shortage every so often. There are many factors why there is a shortage of concrete production. Mostly it’s due to depleting resources and partly because of limited transport ships.  

On the other hand, the need for steel is global. While it’s possible for every country to produce their own concrete products, it may be difficult for some to make steel. That’s why they have to outsource it overseas. Over time, there may not be enough of it for everyone.  

  1. Construction Scheduling

The timeframe is the construction industry is rather strict. Construction companies can earn more if they are able to complete projects faster. It all boils down to pouring concrete at a much faster rate in order to build at least one floor of the building every day.  

Steel, on the other hand, is built by framing them together. This requires specialized heavy tools and equipment to get done. Steel fabrication, on the other hand, can be done offsite or onsite, depending on the construction needs.  

These are all the comparisons and contrasts of steel versus concrete. Now you decide which material is better than the other. Even so, it can’t be denied that they are always best used together. If you need quality concrete services Fishers, be sure to hire a construction company with professionals who are experts in handling concrete and steel.  

Next Generation Party Concepts

Not everyone likes to attend parties. Make those people attend yours by enticing them with your new and fresh party concepts that definitely will not be classified as boring. Serving juice in plastic cups from a jar or food in a toothpick are examples of typical parties. Go the extra mile by showing them that you really spent time planning the party in order to give them one of the best ones they’ll experience, and a fresh take of how parties should be. Here are some party concepts to show others how a good party should be. 

 

  1. Use fruits as glasses or jars 

Good drinks complement good food. Need another way to serve them better? Use fruits! Use pineapple as glasses or watermelons as jars for your favorite drinks to serve on parties. Not only will they taste great but your smoothies will look great on fruit glasses and your cocktails from a watermelon jar. People might not even be able to hold back from getting a snap. 

       2. Add more color 

Not that you’ll add food coloring to baked goods, but the idea is to use colorful items to an already beautiful piece. Add colorful additions to desserts like toppings, syrups, etc. Even drinks are no exception. A simple soda float or champagne float will look and taste great with a colorful sorbet or ice cream.  

        3. Use unique drink holders 

A great example would be floater drink holders. You know, those animal-shaped floaters like flamingos but instead hold drinks rather than humans. There are plain ones as well but with colorful designs. If you are expecting a ton of guests, you won’t have to resort to them. But if they are fewer, then these floaters would be a great idea. 

        4. Play games while the food is still cookin’ 

Don’t let guests wait long for the food to cook by letting them forget so. Play some fun and games like board games, video games, mind-boggling games, etc. while waiting for the food. They might feel hungry afterward and may highly like appreciate if not love your cooking. Hopefully, fingers crossed. 

        5. Unique Giveaways 

Give people something to take away that will remind them of your awesome party. You can draw inspiration from the party’s theme. You have the option of buying an already made items, or, make a DIY gift giveaway which is more special. But either way, make sure that they will bring to mind the awesome party you threw.  

        6. Photo Booths 

They’ve never failed any parties. People simply love to take photos. And it’s a good way to document how well guests are having fun. They can also be a form of a giveaway for your guests. You can actually save some money. Double win. You can always make your own props and use a Polaroid or Instax camera. But a lot of films will be used and that will be costly. If you want to avoid that, you can simply rent a photo booth like what Sacramento Photo Booth Party Rental has to offer. 

Useful Things to Know in Becoming a Dermatologist

Whenever you have time to make your skin beautiful then you would choose to go to a dermatologist to seek for medical suggestions and treatment for the problem in skin. It is ok to have or go there through walk in clinic and most of them have their clinics in the shopping malls or to the big hospitals in cities. When you noticed that something is not right with your skin people would suggest you to visit a dermatologist instead of seeking some help online or trying to ignore it. Some people would want to be like this famous dermatologist as they could earn much money and have a good reputation in the society and have a stable monthly income.  

You may check now some of the useful things to know and you need to do in order to become a successful dermatologist in your city or in the field.  

  1. You need to prepare yourself in going to medical schools as your preparatory stage: In order for you to become a successful then you should study hard while you are in the high school of your life and you need to get good grades. You also need to take a preparatory course like majoring in biology or science in order for you to prepare yourself more when it comes to medical terms and vocabularies. You need to finish the four years so that you could proceed to the medical courses that you want after you graduate from your bachelor’s degree and good grade scores.  
  2. You need to attend and obtain a degree from medical schools you want: It is important that you apply for the best medical school that you want and you need to pass a letter of application in order for you to take tests. When you have the date for the entrance examination then you should make sure that you would pass that one in order for you to qualify and get into there. You have to study harder this time as you have to prepare yourself for the possible examinations in the future for getting a license and become a professional doctor here. You could try to take some test related to medical fields and it would be able to enhance your knowledge about the things in the medical world.  
  3. You need more experiences and take the license to become a professional and licensed dermatologist: When you graduate from the medical course you have taken then you could apply for some internship programs which would develop your skills and know about the application of knowledge. You need to take the license examination as well and you have to pass that one in order for you to be called professional dermatologist in your own field.  
  4. You may now start your own career path and be able to build your own clinic: You could apply for a doctor in a hospital or you could make and build your own clinic and hire employees to work here.