Different Types of Home Foundation

Building a home from the ground up is definitely an exciting task to make. However, it is also one of those tasks that need research and time to make sure that everything will go smoothly. The first decision you might be facing is to determine what type of foundation you want to use beneath your house. Before you make a decision, it is your job to do some research and be aware of the various types of foundations to know what would be suitable for the home design that you have been planning for. Here are the following types of home foundations that you could consider: 


Houses with basements start with a hole nearly 8 feet deep that ends with a concrete slab. Commonly, the basement’s walls are molded by cinder blocks. The whole process is done in 3 parts: the beams are poured first, followed by the walls, and lastly the slab inside the walls. 

This process enables that basement foundation to be waterproof. Homes that have basements could add additional income as well since it adds square footage to the home, which gives additional space for storage if needed. Another reason why basement foundations are recommended is that they are highly resistant to extreme weather condition and fire and they are very durable.  



Houses having crawlspace foundations are raised off the floor by about 2 ft. This foundation is usually formed with a brick facing and cinder block. This kind of foundation is recommended in places with moist climates where water tends to accumulate. Since the house is elevated off the ground, there’s a minimal chance for it to be damaged by the piled up water. Moreover, the crawlspace foundation is less likely to be infested by termites. But, they are susceptible to fungi and mold buildup due to the environment made by the empty space.  


Beam and Pier 

This foundation comprises concrete piers or wood posts set deep into the ground, bearing the building’s weight. This foundation doesn’t directly rest on the ground. Rather, it’s elevated about 18 degrees more, with utility units for electricity and plumbing installed in this crawlspace. A lot of home builders select this foundation type since it can be built easily and it is less expensive compared to other choices. Although this type of foundation can be best used in smaller buildings.  



Basically, a slab foundation is a concrete and flat pad that’s poured onto the ground at a home site. Homebuilders vouch for utilizing slab foundations, especially in warmer places because freezing temperatures could cause the slab to change during cold seasons. As you build your home, keep in mind that the sewer pipe is usually put in place before the concrete is poured.  


As you choose a foundation for a house, you need to reach out to a qualified professional from Concrete Boise. You can talk about what you want and they will let you know which among the types of foundation will suit the home style that you want to achieve and the climate. Contact them now! 


Concrete vs. Steel: Which is better?

Before the use of concrete or steel, building homes and structure are mostly done with the use of wood, thatch, and adobe. Now is a modern construction industry, indeed. The generations before our forefathers might not have visualized today’s cities with massive skyscrapers piercing overhead. 

The question now is which construction material is responsible for all these? Is concrete more superior than steel or vice versa? It’s necessary to look into concrete and steel individually in order to answer that question.  

The Benefits of Concrete and Steel  

There’s no doubt that concrete and steel offer a lot of benefits to humankindWhile it may not be necessary to compare one to the other because they have different qualities, it may be interesting to note how each contributes to the following factors:   

  1. Safety

Between steel and concrete, studies show that concrete is much safer. The cast that concrete forms make a building resistant to impact and explosions. Concrete can also endure a very high temperature for quite some time without losing its structural integrity. It can also resist wind quite effortlessly.  

Steel, on the other hand, can’t do most of what concrete can do in the list above. Steen can melt and soften away when subjected to a very high temperature. Even so, there are additives to steel that can make it work better in terms of fire and heat. 

  1. Cost

Construction materials are getting more expensive by the minute. However, concrete prices seem quite stable, which is good news. Concrete prices rarely fluctuate even if the prices of other commodities have risen so high.  

Unfortunately, we can’t say the same for steel. The prices of steel sways strongly it is almost impossible to predict how it will behave in the next couple of years. The increase in the price of steel can go from 20% to 50% over a specific period of time.  

  1. Availability

Steel and cement are manufactured using natural resources so it’s quite understandable that there will be reports of shortage every so often. There are many factors why there is a shortage of concrete production. Mostly it’s due to depleting resources and partly because of limited transport ships.  

On the other hand, the need for steel is global. While it’s possible for every country to produce their own concrete products, it may be difficult for some to make steel. That’s why they have to outsource it overseas. Over time, there may not be enough of it for everyone.  

  1. Construction Scheduling

The timeframe is the construction industry is rather strict. Construction companies can earn more if they are able to complete projects faster. It all boils down to pouring concrete at a much faster rate in order to build at least one floor of the building every day.  

Steel, on the other hand, is built by framing them together. This requires specialized heavy tools and equipment to get done. Steel fabrication, on the other hand, can be done offsite or onsite, depending on the construction needs.  

These are all the comparisons and contrasts of steel versus concrete. Now you decide which material is better than the other. Even so, it can’t be denied that they are always best used together. If you need quality concrete services Fishers, be sure to hire a construction company with professionals who are experts in handling concrete and steel.